Polypropylene
Sturdy, unbreakable, autoclavable Petri dishes made of polypropylene, with triple vents.
Cat. No. | Dish OD (mm) | Dish height (mm) | Dish wall thickness (mm) |
H402-050 | 50 | 13 | 1.7 |
H402-075 | 95 | 13 | 1.7 |
H402-095 | 95 | 13 | 1.7 |
H402-125 | 125 | 18 | 1.9 |
H636-150 | 150 | 20 | 2.0 |
Polypropylene
Sturdy polypropylene Petri dish, suitable for use in microwave systems. H417 is used with the Prep-Eze™ during processing for the BioWave® Laboratory Microwave Oven.
Dimensions of dish: ID 52mm, OD 54mm, IH 12mm, OH 13mm
Diameter of lid: 58mm
Polystyrene
Features
- Manufactured from virgin polystyrene
- 2 Compartments
- Sterile
- 3 Vents
- Management System EN ISO13485 with SOPs and 100,000grade clean-room guarantee
- CE marked in accordance with European Directive 98/79/EC
Polystyrene
Features
- Manufactured from virgin polystyrene
- Alphanumeric grid
- Sterile
- Management System EN ISO13485 with SOPs and 100,000grade clean-room guarantee
- CE marked in accordance with European Directive 98/79/EC
Polystyrene
Features
- Manufactured from virgin polystyrene
- Management System EN ISO13485 with SOPs and 100,000grade clean-room guarantee
- CE marked in accordance with European Directive 98/79/EC
- Sterile
- Individually wrapped
- 4 Vents
Cellulose
Shrink seals are colourless transparent cellulose bands for sealing Petri dishes. They make an invaluable addition to any microbiology laboratory. This product is fantastic when preparing in‐house plates that are not used quickly. Ideal when dealing with sensitivity plates for TB and fungus cultures that require prolonged incubation. Easy to apply. The size of the standard band is 9 x 25mm.
Stickers for labelling Petri dishes.
Easy to Use - Label Petri dishes quickly, neatly, and reliably.
Temperature resistant - Labels remain firmly intact in temperatures from 4°C to 42°C.
Convenient - Instantly form an imprint Petri dish for quick reference, then remove if you wish.
Ideally sized - PetriStickers™ are 76mm diameter.
Other grid designs as well as pie sectors available.
Borosilicate glass
Excellent quality, European made crystallising dishes, without spout. Borosilicate glass with white printing and writing panel.
Polypropylene
PP conical filter flasks particularly sturdy and moulded with heavy wall to withstand vacuum.
Cat. No. | Volume (mL) | Top internal diameter (mm) |
H638 | 500 | 34 |
Borosilicate glass
Excellent quality, European made filter flasks. Borosilicate glass, white printing and writing panel.
Porcelain
Cat. No. | Volume (mL) | Total height (mm) | Top internal diameter (mm) | Tube external diameter (mm) | For filter paper |
H637‐030 | 30 | 30 | |||
H637‐050 | 50 | 105 | 50 | 14 | W221‐050 |
H637‐070 | 120 | 70 | W221‐070 | ||
H637‐090 | 200 | 155 | 90 | 24 | W221‐090 |
H637‐135 | 135 | W221‐125 | |||
H637‐150 | 1000 | 150 | W221‐150 |
SAN
Transparent Imhoff‐type sedimentation cone with moulded graduations and screw‐cap at tip for ease of cleaning. Made of SAN (styrene acrylonitrile). Used for measuring solid matter in suspensions.
Stand is a separate item.
Made by VITLAB, Germany.
Graduations:
0‐2mL = 0.1mL
2‐10mL = 0.5mL
10‐40mL = 1mL
40‐100mL = 2mL
100‐1000mL = 50mL
Rack, polymethyl methacrylate, dimensions 150 x 300 x 290mm, supports 2 cones.
For haematocrit centrifuges on page F1.
These high quality micro‐haematocrit tubes conform to ISO 12772 and are supplied colour‐coded blue for plain, or red for sodium heparinised. Tubes are fire polished to reduce wear on the centrifuge seals. Uniform heparinisation assured.
Packaged in dispenser of 100 tubes for hygienic, easy handling, or a box of 10 dispensers.
Outside diameter = 1.55mm, inside diameter = 1.15mm
The sell unit is 2 dispensers and the discount is for 5 x 2 dispensers.
An effective and easy method to reliably seal capillary tubes after taking samples. Simple, clear numbering system to identify individual tubes. Dependable, non-shrink, non drying wax seal, 10 plates/box.
Complete filtering system, beautifully crafted using most suitable materials. This all glass vacuum filter system restricts contact with reactive surfaces such as steel or rubber, to minimise contamination of the filtrate. Standard 47/50mm filtration funnels mount on a filtration flask using a ground glass joint. The filtered drip is positioned below the side arm to prevent sample aspiration into the vacuum line.
Features
This filter flask kit is made of clear, extra hard borosilicate glass.
Individual pieces are made to a high accuracy and fit together tightly to seal the vacuum.
Sizes meet international standards.
The entire unit may be autoclaved
Applications
Glass vacuum filter set is suited to aqueous, organic or corrosive liquids for particulate contamination analysis.
The filter flask unit may be used to sterilise heat intolerant liquids using a suitable pore size filter.
The filter apparatus may be used to clean and outgas solvents for HPLC.
You can find suitable membrane filters for this instrument here.
Whole set can be autoclaved at 121°C
Materials | |
Funnel, base unit and filter flask | Borosilicate glass |
Support | Borosilicate glass frit, stainless steel or PTFE |
Connection | |
Ground glass joint | 14/20 female, 40/35 female |
Side arm (for vacuum tube) | 6mm (3/8 inch), 6mm (3/8 inch) |
Capacity | |
Funnel | 300mL, 500mL |
Receiver filter flask | 1000mL, 2000mL |
Suitable membrane | ⌀47mm, ⌀50mm |
Suitable and cost effective diaphragm vacuum pumps feature on page V4
Manifolds provide vacuum support for filtration of one, three or six test samples simultaneously. One single vacuum pump can enable the manifolds to finish the whole operation. It is more efficient than normal vacuum filtration. The manifolds with polished Type 316L stainless steel, accommodate glass or stainless steel filter holders, resistant to most chemically aggressive liquids.
Features
Each station uses a separate control valve for independent operation.
Sturdy units have a low centre of gravity, they will not tip when fully loaded.
Anodised aluminium handles on both ends for positioning on bench top.
You can find suitable membrane filters for this instrument here.
Whole set can be autoclaved at 121°C