SAFETY DATA SHEET
Cytoseal™ 60 mounting medium, Cytoseal™ 280 mounting medium.
1. IDENTIFICATION
Product Identifiers
Product Name:
Cytoseal™ 60 mounting medium, Cytoseal™ 280 mounting medium.
Other Names:
Accumount 60 Mounting Medium, Accumount 280 Mounting Medium, Acrylic Resin with Toluene, Aromatic Hydrocarbon
Product Number(s):
IA013, IA014
CAS Number:
-
Recommended use of the chemical and restriction on use
Laboratory use.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Toxic
May impair fertility. May cause harm to the unborn child.
Harmful
Harmful if swallowed. Harmful: danger of serious damage to health by prolonged exposure through inhalation, in contact with skin and if swallowed. Harmful: may cause lung damage if swallowed
Irritant.
Irritating to eyes and skin.
Highly flammable
Highly flammable
Dangerous for the environment
Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Vapours may cause drowsiness and dizziness.
Label Elements
Signal Words
Danger
Hazard Statement(s)
The product has to be labelled due to the calculation procedure of the "General Classification guideline for preparations of the EU" in the latest valid version.
Precautionary Statement(s)
Highly flammable.
Also harmful: danger of serious damage to health by prolonged exposure through inhalation, in contact with skin and if swallowed.
Also harmful if swallowed.
Irritating to eyes and skin.
May impair fertility.
May cause harm to the unborn child.
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Avoid contact with the eyes and skin.
Primary route(s) of entry
Not available.
Human Health
Inhalation:
Vapours may cause drowsiness and dizziness.
Ingestion:
Harmful: may cause lung damage if swallowed.
Eyes:
Irritating to eyes and skin.
Skin:
Irritating to eyes and skin.
Environment
Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Name
CAS No.
Content (w/w)
Classification
toluene
108-88-3
50-100%
-
Acrylic Resin
28262-63-7
25-50%
-
BBP
85-68-7
2.5-10%
-
2,6-di-tert-butyl-p-cresol
128-37-0
≤ 2.5%
-
4. FIRST AID MEASURES
Ingestion
Call for a doctor immediately.
Inhalation
In case of unconsciousness place patient stably in side position for transportation.
Skin Contact
Immediately wash with water and soap and rinse thoroughly.
Eye Contact
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Other Information
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
5. FIREFIGHTING MEASURES
Suitable extinguishing equipment
CO₂, sand, extinguishing powder. Do not use water.
HAZCHEM
Not available.
Special protective equipment and precautions for fire fighters
For safety reasons unsuitable extinguishing agents: Water with full jet.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Keep unprotected persons away.
Environmental precautions
Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water.
Methods and materials for containment and clean up
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation. Do not flush with water or aqueous cleansing agents.
7. HANDLING AND STORAGE
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Open and handle receptacle with care.
Prevent formation of aerosols.
Conditions for safe storage
Keep ignition sources away - Do not smoke.
Protect from heat.
Protect against electrostatic charges.
Keep respiratory protective device available.
Keep container in a well-ventilated place.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Standards
Material
TWA ppm
TWA mg/m3
STEL ppm
STEL mg/m3
toluene
50 ppm
191 mg/m³
150 ppm
574 mg/m³,-
6-di-tert-butyl-p-cresol
NA
10 mg/m³
NA
NA
Engineering controls
Store in a cool location.
Personal protective equipment
Eye and face protection
Tightly sealed goggles.
Skin protection
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
Material of gloves.
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material.
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Body protection
No information available.
Respiratory protection
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
Appearance
Colourless liquid
Odour
Aromatic
pH
Not determined.
Vapour Pressure
at 20 °C: 29 hPa
Density
Not determined.
Boiling Point
111 °C
Melting Point
Undetermined.
Solubility
Not miscible or difficult to mix with water.
Specific Gravity of Density
Not determined.
Flash Point
4 °C
Flammable (Explosive) Limits
Lower: 1.2 Vol %
Upper: 7.0 Vol %
Ignition Temperature
535 °C
Formula
Not available.
10. STABILITY AND REACTIVITY
Reactivity
No further relevant information available.
Chemical stability
No decomposition if used according to specifications.
Possibility of hazardous reactions
No dangerous reactions known.
Conditions to avoid
No further relevant information available.
Incompatible materials
No further relevant information available.
11. TOXICOLOGICAL INFORMATION
Acute effects
The product shows the following dangers according to the calculation method of the General EU Classification Guidelines for Preparations as issued in the latest version.
Harmful .
Irritant.
Eye contact
Irritating effect.
Skin contact
Irritant to skin and mucous membranes.
Ingestion
No further relevant information available.
Inhalation
No further relevant information available.
Toxicity and irritation
LD/LC50 values relevant for classification:
108-88-3 toluene
OralLD50 5000 mg/kg (rat)
Dermal LD50 12124 mg/kg (rabbit)
Inhalative LC50/4 h 5320 mg/l (mouse)
85-68-7 BBP
Oral LD50 2330 mg/kg (rat)
12. ECOLOGICAL INFORMATION
Ecotoxicity
Toxic for fish.
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
Other adverse effects
Water hazard class 2 (German Regulation) (Self-assessment): hazardous for water.
Do not allow product to reach ground water, water course or sewage system.
Danger to drinking water if even small quantities leak into the ground.
Also poisonous for fish and plankton in water bodies.
Toxic for aquatic organisms.
13. DISPOSAL CONSIDERATIONS
General information
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
14. TRANSPORT INFORMATION
ADG label required
HAZCHEM
Not available.

UN Number
UN1866
Proper shipping name
1866 RESIN SOLUTION, ENVIRONMENTALLY HAZARDOUS · IMDGRESIN SOLUTION (BBP, 2,6-di-tert-butyl-p-cresol), MARINE POLLUTANT.
Transport hazard class
3 F
Packing group
II
Environmental hazard
Product contains environmentally hazardous substances: BBP
Special precautions for users
Special precautions for user Warning: Flammable liquids. Danger code (Kemler): 336
EMS Number: F-E,S-D
Additional information
ADG · Limited quantities (LQ) 5L
Excepted quantities (EQ) Code: E2
Maximum net quantity per inner packaging: 30 mL Maximum net quantity per outer packaging: 500 mL Transport category 2
Tunnel restriction code D/E.
15. REGULATORY INFORMATION
Poisons Schedule Number
S6
Other Information
No further relevant information available.
16. OTHER INFORMATION
SDS preparation date
13 November 2017
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.

... End of SDS ...

Order Type / Payment Method / Address / Shopping Cart / Checkout