Measures electromagnetic emissions from high voltage power transmission lines, large transformers, and large electric motors. This type of radiation may interfere with some scientific instruments - especially transmission electron microscopes. Some people are concerned about the effect of this type pf radiation. The evidence of the carcinogenic effect of such electromagnetic emissions remains inconclusive, and would only be a concern if doses are particularly high and children are exposed to this for extended periods.
Reads milli-Gauss and micro-Tesla on a large 32mm high display. The display indicates when the object being measured is out of range as well as when the battery is low. Features both standard and maximum hold. Powered by a standard 9V battery lasting approximately 100 hours.
Comes with battery, instructions, and a soft carrying case.
Dimensions: 130 x 56 x 38mm
Weight: 170g
Available with NIST traceable certificate of calibration - E840045C
Unit of Measure | Range | Resolution | Accuracy |
milli-Gauss | 0.1 ~ 2000 mG | 0.1 ~ 1 | ±2.5% + 3d @50/60Hz |
micro-Tesla | 0.01 ~ 200μT | 0.01 ~ 0.1 | ±2.5% + 3d @50/60Hz |
Optional accessories
E840090 Water resistant instrument pouch
Evaluate the Radio Frequency (RF) emissions of mobile phones, radio and TV transmission towers, wireless cameras, Wi-Fi and LAN detection and installation, microwave oven leakage and other environmental safety concerns. Designed for measuring and monitoring the electromagnetic field radiation intensity - radio frequency, including microwaves. Radio Frequency is the range of electromagnetic frequencies above the audio range and below infrared light.
Features maximum and minimum hold, an audible alarm, and a zero adjustment to eliminate background EMF. The display also indicates overload and low battery.
Comes with a soft carrying case and standard 9V battery, which provides approximately 100 hours of use.
Dimensions: 130 x 56 x 38mm
Weight: 170g
The metre is calibrated precisely on the frequency value of 2.45 GHZ.
Specifications | |
Display | 3¾ digits, maximum reading 3999 |
RF Power density | 0.003~2.700 mW/cm² |
RF Frequency | 50MHz ~ 3.5GHz |
Microwave frequency | 2450MHz |
Resolution | 0.001mW/cm² |
Accuracy | ±2dB @ 2.45GHz ±50MHz |
Axis | Single |
Alarm | @ readings >1mW/cm² |
Operating temperature | 5°C ~ 40°C |
Operating RH | <80% RH |
Optional Accessories
Easily portable and designed for simple one-hand operation.
Reads oxygen in air for environmental studies, IAQ, bio-technology (for oxygen incubators and anaerobic cultivators), food storage and refrigeration, testing fire alarm and fuel cell systems. The fast, highly reliable, galvanic oxygen sensor is unaffected by acidic gases such as CO₂. Simultaneously displays O2 concentration and air temperature in °C or °F.
Features hold, min/max, a low battery indicator, ATC and auto-power-off.
Comes with 4 AAA batteries and a soft carrying case with a belt loop and shoulder strap.
Dimensions: 180 x 40 x 40mm
Weight: 175g
Specifications
Range | Resolution | Accuracy | |
O2 | 0 ~ 30% | 0.1% | ± (1% reading + 0.2% O2) |
Temp | 0 ~ 50°C | 0.1° | ± 0.8°C |
For environmental testing anywhere. Combines a light meter, humidity meter, thermometer, anemometer into a single compact unit weighing only 160g. Own the equivalent of 4 meters for about the price of any one of them. Features dual display with low battery and over range indications, touch-tone buttons, max-min, auto power off and hold functions. Comes ready to use with soft carrying case, wrist strap, instructions and a 9V battery.
Dimensions: 150 x 65 x 30mm
Weight: 160g
Range | Resolution | Accuracy | |
°C Ambient | 0~50 | 0.1 | ±1.2°C |
°C Type K | -100~1300 | 0.1 | ±(1% + 1°C) |
RH | 10~95% | 0.1 | ±6% 30 ~ 60RH otherwise ±8% |
Airspeed m/s km/h mile/h knots ft/min | 0.4 ~ 25.0 1.4 ~ 90.0 0.9 ~ 55.9 0.8 ~ 48.6 80 ~ 4930 | 0.1 0.1 0.1 0.1 1 | ±(3% + 2d) ±(3% + 2d) ±(3% + 2d) ±(3% + 2d) ±(3% + 20ft/min) |
Lux | 0~20,000 | 1 | ±(5% + 4d) |
Foot candle | 0~2,000 | 0.1 | ±(5% + 4d) |
Using interchangeable probes this versatile metre reads airspeed, temperature, RH and light. The user can order probes for the parameters currently required and add additional probes in the future. Intelligent probes electronically retain calibration information. No recalibration is required when changing probes. The display simultaneously reads temperature in user selectable °C & °F and all measurements are automatically temperature compensated. RS-232 port enables communication with a computer. Also features auto power off, hold and min-max. Fold out easel back and a tripod screw. Comes with 9V battery and a hardshell foam-lined carrying case with room for one or two probes.
Dimensions: (main unit):195 x 68 x 30mm
Weight: (main unit): 250g
Thermocouple probes
Type J and K thermocouple probes for the following applications:
- Immersion and general purpose
- Penetration
- Surface
- Ambient
Technical note - Thermocouple probes specifications
Ask for prices
Range | Resolution | Accuracy | |
Thermocouple Probes | |||
Type K | -50~1300°C | 0.1 | ±0.2% +1°C |
Type J | -50~1150°C | 0.1 | ±0.2% +1°C |
Anemometer Probe E850072 | |||
M/s | 0.4~25.0 | 0.1 | ±2% +2d fs |
Km/h | 1.4~90.0 | 0.1 | ±2% +2d fs |
Mile/h | 0.9~55.9 | 0.1 | ±2% +2d fs |
Knots | 0.8~48.6 | 0.1 | ±2% +2d fs |
Ft/min | 80~4930 | 1 | ±2% +20 ft/min |
°C | 0~50 | 0.1 | ±0.8° |
Metal Anemometer Probe E850077 | |||
M/s | 0.5~40.0 | 0.1 | ±2% +2d fs |
Km/h | 1.8~144.0 | 0.1 | ±2% +2d fs |
Mile/h | 1.1~89.4 | 0.1 | ±2% +2d fs |
Knots | 1.0~78.1 | 0.1 | ±2% +2d fs |
Ft/min | 100~7880 | 1 | ±2% +20 ft/min |
°C | 0~60 | 0.1 | ±0.8° |
Mini Extension Anemometer Probe E850073 | |||
M/s | 0.4~12.0 | 0.1 | ±2% +2d fs |
Km/h | 1.4~43.2 | 0.1 | ±2% +2d fs |
Mile/h | 0.9~26.8 | 0.1 | ±2% +2d fs |
Knots | 0.8~23.3 | 0.1 | ±2% +2d fs |
Ft/min | 80~2358 | 1 | ±2% +20 ft/min |
°C | 0~50 | 0.1 | ±0.8° |
Humidity Probe E850074, with N.I.S.T tracable certificate of calibration E850074C | |||
RH | 10%~95% | 0.1% | >70%RH ±5%rdg +1%RH <70%RH ±5%RH |
°C | 0~50 | 0.1 | ±0.8° |
Light Probe E850075, with N.I.S.T tracable certificate of calibration 850075C | |||
Lux | 2,000 | 1 | ±5%rdg +2d |
Lux | 20,000 | 10 | ±5%rdg +2d |
Lux | 50,000 | 100 | ±5%rdg +2d |
Foot Candle | 200 | 0.1 | ±5%rdg +2d |
Foot Candle | 2,000 | 1 | ±5%rdg +2d |
Foot Candle | 5,000 | 10 | ±5%rdg +2d |
IR Temperature E850076 D/S 7:1 Emissivity 0.95 | |||
°C | -10~300 | 1 | ±3%rdg or ±3oC which ever is greater |
Optional accessories
E840090 Water resistant instrument pouch
E840092 Bench-top tripod
E840093 Field tripod
E840057 RS232 1.2m cable. A standard RS232 cable is not sufficient, the instrument has a unique plug.
E840094 USB cable
E850080 Data acquisition software
Available with NIST traceable certificate of calibration - E850074C, E850075C
Parameters
- Air speed
- Humidity
- Light
- Temperature
A unique hand powered generator enables environmental quality measurements with or without batteries. Combines an anemometer, hygrometer, thermometer and light metre in a single rugged unit. Also reads any type-K thermocouple probe. The large dual LCD screen displays results and indicates low battery and out of range. Features touch-tone buttons, min/max, auto power off and hold functions. Comes ready to use in a foam lined hard shell carrying case with instructions, 9V battery, tripod back and a tripod screw.
Dimensions: 175 x 75 x 45mm
Weight: 415g
E850068 | Range | Resolution | Accuracy |
°C ambient | 0 ~ 50 | 0.1 | ±1.2°C |
°C Type K | -100 ~ 1300 | ±(1% + 1°C) | |
RH | 10 ~ 95% | <70%RH ±4% >70%RH ±(4% rdg + 1.2%RH) | |
Airspeed m/s | 0.4 ~ 25.0 | <20 m/s ±3% fs >20 m/s ±4% fs | |
Airspeed km/h | 1.4 ~ 90.0 | ||
Airspeed mile/h | 0.9 ~ 55.9 | ||
Airspeed knots | 0.8 ~ 48.6 | ||
Airspeed ft/min | 80 ~ 4930 | 1 | |
Lux | 0 ~ 2,000 1800 ~ 20,000 | 1 10 | ±5% rdg + 8d |
Foot Candle | 0 ~ 204.0 170 ~ 1860 | 0.1 1 |
Optional accessories
E800060~77 Type-K thermocouple probes
E840090 Water resistant instrument pouch
E840093 Field tripod
Measures
- Air speed
- Humidity
- Light
- Sound
- Temperature
Combines an anemometre, hygrometre, thermometre, sound and light metre in a single hand-held unit. Also reads any type-K thermocouple probe. Results are displayed on a large dual LCD screen with low battery and out of range indications. Features touch-tone buttons, min/max, auto power off and hold functions. Comes ready to use in a soft carrying case with RS232 computer port instructions, 6 AAA batteries, tripod back and a tripod screw.
Dimensions: 255 x 75 x 35mm
Weight: 330g
E850069 | Range | Resolution | Accuracy |
°C ambient | 0 ~ 50 | 0.1 | ±1.2°C |
°C Type K | -100 ~ 1300 | ±(1% + 1°C) | |
RH | 10 ~ 95% | <70%RH ±4% >70%RH ±(4% rdg + 1.2%RH) | |
Airspeed m/s | 0.4 ~ 30.0 | <20 m/s ±3% fs >20 m/s ±4% fs | |
Airspeed km/h | 1.4 ~ 108.0 | ||
Airspeed mile/h | 0.9 ~ 67.0 | ||
Airspeed knots | 0.8 ~ 58.3 | ||
Airspeed ft/min | 80 ~ 5910 | 1 | |
Lux | 0 ~ 2,000 1800 ~ 20,000 | 1 10 | ±5% rdg + 8d |
Foot Candle | 0 ~ 204.0 170 ~ 1860 | 0.1 1 | |
dB | 35 ~ 130 | 0.1 | 25+5°C ±1.5dB |
Optional accessories
E800060~77 Type-K thermocouple probes
E840057 RS232 cable
E840094 RS232 to USB adaptor cable
E840097 AC Adaptor
E840093 Field tripod
E850016 2-point acoustical calibrator
E850080 Software
Available with NIST traceable certificate of calibration - E850069C
Monitor up to 12 environmental parameters with one tiny instrument.
Light weight, tiny size with simple, one-hand, operation. All units read air speed in addition to the wide selection of environmental parameters listed below. Will sense airflow as low as
0.4 m/s. Replaceable snap-in anemometer vane. All models feature min/max, hold, a backlight and come complete with a wrist strap, carry pouch, and button cell battery. Model 850027
accurately measures liquid and solid temperatures using the optional Pt 1000 penetration probe.
Range | Resolution | Accuracy | E850025 | E850026 | E850027 | |
Wind speed | 80 ~ 3937 ft/min 0.4 ~ 20.0 m/s 1.4 ~ 72.0 km/h 0.9 ~ 44.7 mile/h 0.8 ~ 38.8 knots 32 ~ 122 °F (0 ~ 50 °C) | 1 ft/min 0.1 m/s 0.1 km/h 0.1 MPH 0.1 knots 0.1 °F/°C | ≤ 20 m/s: ± 3% F.S. > 20 m/s: ± 4% F.S | |||
Air temperature | 0 ~ 50 °C | 0.1 °C | ± 1.2 °C | |||
RH | 10 ~ 95 %RH | 0.1 %RH | < 70% RH: ± 4% RH ≥ 70% RH: ± (4% rdg +1.2% RH) | |||
Air volume | e 0.024 ~ 36000 CMM 0.847 ~ 1271300 CFM | 0.001/0.01/0.1/1 0.001/0.01/0.1/1 /10 (x10)/100 (x100) | ||||
Wind chill | -0.4 ~ 44.2 °C | 0.1 °C | ± 2.0 °C | |||
Heat stress index | 0 ~ 100 °C | 0.1 °C | ± 2.0 °C | |||
Dew point | -25.3 ~ 49.0 °C | 0.1 °C | Calculate from the humidity/temperature value | |||
Wet bulb | -5.4 ~ 49.0 °C | 0.1 °C | Calculate from the humidity/temperature value | |||
PT 1000 ohm probe (optional) | -10.0 ~ 100.0 °C | 0.1 °C | ± 1.2 °C | |||
Barometric pressure | 10.0 ~ 999.9 hPa 1000 ~ 1100 hPa 7.5 ~ 825.0 mmHg 0.29 ~ 32.84 inHg | 0.1 hPa 1 hPa 0.1 mmHg 0.01 inHg | ± 1.5 hPa ± 2 hPa ± 1.2 mmHg ± 0.05 inHg | |||
Altitude | -2000 ~ 90000 m | 1 m | ± 15 m | |||
Visible light | 0 ~ 2200 Lux 1800 ~ 20000 Lux 0 ~ 204.0 Fc 170 ~ 1860 Fc | 1 Lux 10 Lux 0.1 Ft-cd 1 Ft-cd | ± 5% rdg ± 8 dgt |
Monitor light levels anywhere with fast, stable and accurate response. Results are easily read on the extra large LCD (38.1mm) with bar graph, low battery and over range indications. The colour and cosine corrected sensor meets C.I.E. photopic spectrum. Offers peak function and a unique and very useful ability to compensate for the different colors of tungsten, fluorescent, mercury and sodium lights, with the push of a button. The result is readings true to actual lighting conditions. Also features RS232 computer output, max-min, auto power off, external zero adjustment, hold function and a tripod back. Comes ready to use with a 9V battery, instructions, soft padded case with shoulder strap, and a detachable sensor with cover for easier replacement or repair.
Meter dim.: 200 x 68 x 30mm
Weight: 280g
Available with NIST traceable certificate of calibration - E840022C
Optional accessories
E840057 RS232 cable. A standard RS232 cable is not sufficient, the instrument has a unique plug.
E850080 Software
E840090 Water resistant instrument pouch
E840092 Bench-top tripod
E840093 Field tripod
Reads lux, foot candles and functions as a type K or J thermometer. Records data onto standard SD memory cards (like a digital camera). When full, simply exchange SD cards for unlimited data storage. The removable SD card is easy to transport and insert into a computer's memory card slot or SD card adapter. Uploads preformatted data to Excel, without the need for software and cables. Additional SD cards are readily available in a variety of memory sizes. Can also manually record 99 readings for on-screen review or stream data directly to a computer using the optional software and cables.
Each data set includes lux or foot candle reading, time and date. Features push button zero adjustment, min/max, auto power off, low battery indicator and hold function.
This well made unit is extremely accurate with fast response times, and includes a fold-out tripod and large easy-to-read backlit LCD.
Comes ready to use in a soft carrying case complete with a detachable colour-corrected probe that meets the C.I.E. photopic spectrum, 6 AA batteries, instruction manual and a 2GB SD card.
Dimensions: 177 x 68 x 45mm
Weight: 489g
Optional accessories
E800060~77 Type K thermocouple probes
E840057 RS232 computer cable
E840059 Additional 2GB SD card
E840090 Water resistant instrument pouch
E840093 Field tripod
E840094 USB computer cable
E840097 AC adaptor
E850080 Software
Range | Res. | Accuracy | |
Lux | 2,000 | 1 | ± (4%+2 dgt) rdg |
20,000 | 10 | ||
100,000 | 100 | ||
Foot Candle | 200 | 0.1 | |
2,000 | 1 | ± (4%+2 foot candle) rdg | |
10,0001 | 10 | ± (4%+20 foot candle) rdg | |
Type K | -50 ~ 1300°C | 0.1 | ± (0.4% + 1°C ) fs. |
Type J | -50 ~ 1200°C |
E850007C comes with NIST traceable certificate of calibration.
Applications
- Measure damaging UV (ultraviolet) light in the environment and museums.
- UV degradation studies in the pharmaceutical, cosmetic, semiconductor, printing, window tinting and other industries.
- Laboratory chromatography, electrophoresis and forensics.
- Test UV sterilisation and dermatology lamps in hospitals.
UV light intensity appears on the large backlit display in either µW or mW/cm² while the small lower display simultaneously shows minimum, maximum, average and recorded data. Up to 20 data points can be recorded automatically at a variety of intervals. Features zero point reset, hold and low battery indicator.
Comes in a protective, hard foam lined carrying case complete with a UV probe, tripod screw, magnetic mount and a 9V battery.
Model E850009 measures long and medium wave UV-A/B for applications such as forensics, chromatography, electrophoresis and dermatology.
Model E850010 measures short wave UV-C light for applications such as UV light fume hoods, UV sterilisation, industrial glass and non-destructive testing.
Dimensions: 145 x 55 x 40mm
Weight: 135g
Available with NIST traceable certificate of calibration - E850009C and E850010C
Cat. No. | Wavelength | Calibration Point | UV Range | Resolution | Accuracy |
E850009 | 280 ~ 400 nm | 365 nm | 1 µW/cm² ~ 40.00 mW/cm² | 1 µW and 0.01 mW/cm² | ±4% ±1 digit (@23 ±5°C) |
E850010 | 220 ~ 275 nm | 254 nm |
Optional accessories
E840090 Water resistant instrument pouch
E840092 Bench-top tripod
E840093 Field tripod
Reads air velocity and temperature and functions as a type K or J thermometer. Records data onto standard SD memory cards. When full, simply exchange SD cards for unlimited data storage. The removable SD card is easy to transport and insert into a computer's memory card slot or SD card adapter. Uploads preformatted data to Excel, without the need for additional software and cables. Additional SD cards are readily available in a variety of memory sizes.
Can also manually record 99 readings for on-screen review or stream data directly to a computer using the optional software and cables.
Each data set includes air speed, air temperature, time and date. Features min/max, auto power off, low battery indicator and hold function.
This well made unit is extremely accurate with fast response times, and includes a fold-out tripod and large easy-to-read backlit LCD.
Comes ready to use in a soft carrying case complete with a detachable probe, 6 AA batteries, instruction manual and a 2GB SD card.
Dimensions: 177 x 68 x 45 mm
Weight: 489g
Optional accessories
E800060~77 Type K thermocouple probes
E840057 RS232 computer cable
E840059 2GB SD card
E840090 Water resistant instrument pouch
E840093 Field tripod
E840094 USB computer cable
E840097 AC adapter
E850080 Software
Range | Res. | Accuracy | |
Ft/min | 79 ~ 6890 | 1 | ± (2%+40 FPM) rdg |
Km/h | 1.4 ~ 126 | 0.1 | ± (2%+0.8 Km/h) rdg |
mph | 0.9 ~ 78.3 | ± (2%+0.4 mph) rdg | |
Knots | 0.8 ~ 68 | ± (2%+0.4 Knots) rdg | |
m/S | 0.4 ~ 30 | ± (2%+0.2 m/S) rdg | |
Type K | -50 ~ 1300°C | ± (0.4% + 1°C ) fs. | |
Type J | -50 ~ 1200°C |
Reads air velocity and temperature and functions as a type K or J thermometer. Records data
onto removable, standard SD memory cards (like a digital camera). When full, simply exchange SD cards for unlimited data storage. The removable SD card is easy to transport and insert into a computer's memory card slot or SD card reader. Uploads pre-formatted data to Excel, without the need for additional software and cables. Additional SD cards are readily available in a variety of memory sizes. Can also stream data directly to a computer using the optional software and cables. Each data set includes air speed, air temperature, time and date. Features min/max, auto power off, low battery indicator and hold function. This well made unit is extremely accurate with fast response times, and includes a fold-out tripod and large, easy-to-read backlit LCD. Comes ready to use in a soft carrying case complete with a detachable telescopic probe, 6 AA batteries, instruction manual and a 2GB SD card.
Dimensions: 177 x 68 x 45 mm. weight: 460 g.
Range | Resolution | Accuracy | |
Ft/min | 40 - 3940 | 1 | ± (1%+20 fpm) fs |
Knots | 0.4 - 38.8 | 0.01 - 0.1 | ± (1%+0.2 Knots) fs |
m/S | 0.2 - 25.0 | ± (1%+0.1 m/S) fs | |
Km/H | 0.7 - 72.0 | ± (1%+0.3 Km/h) fs | |
mph | 0.5 - 44.7 | ± (1%+0.2 mph) fs | |
Type K | -50 - 1300°C | 0.1 | ± (0.4% + 1°C ) fs |
Type J | -50 - 1100°C | ||
Air tempture | 0 - 50°C | 0.8°C |
Optional accessories
E800060-77 Type K Thermocouple Probes
E840057 RS232 Computer Cable
E840059 2GB SD Card
E840090 Water Resistant Instrument Pouch
E840093 Field Tripod
E840094 RS232 to USB Adaptor Cable
E840097 AC Adaptor
E850080 Software
Simple and effective: a finger-actuated mini vacuum bellow with 12.5mm straight tip and 9.3mm silicone cup.
Features
- ESD safe rubber body
- Will pick up and hold up to 35g
- Easily picks up cover glasses, mica or silicon discs for accurate placement
- No-scratch silicone rubber cup
- More user friendly than conventional metal tweezers
Documents
Pen-Vac™ gives a superior means for the handling of small, flat surface objects. Pen-Vac is ideal for electron microscopy and histology work. It can be used to move grids, pick up stubs, align membranes, work with glass slides, cover slips and much more. Additionally, Pen-Vac is useful in the electronics assembly industry, for jewellers, model builders etc.
Features
- Lifts up to 50 grams
- Totally self-contained vacuum
- Light-weight: less than 30 grams
- Fits into a pocket like a pen
- Brushed aluminium body
- Storage compartment in handle for vacuum tips and cups
- No power supply needed
- Available in various sizes
- Interchangeable vacuum probes
Pen-Vac™ is supplied with:
A variety of vacuum probes, with attached vacuum cup, straight and angled to suit your applications. The stainless steel needles of the probes are 12mm long. Vacuum cups are made of silicone.
Set consists of:
One pen with 3 angled and 3 straight probes and matching cups, 2 cups per size, 3.2, 6.4 and 9.5mm. Replacement cups are available in 7 sizes.
ESD-safe Pen-Vac™ with accessories is available as well.
Documents
Vacuum pick-up system including pump, finger control pen, five interchangeable tips (12, 16, 18, 20 and 25 gauge), 3 ea. clear silicone rubber vacuum cups (3.6mm, 6.4mm, 10mm), in-line filter and hose.
Handle and transport grids and wafers without the use of tweezers. Use this system for picking up delicate lightweight material with finger-controlled vacuum. Attach various hollow needle tips (5 with system) or rubber cups (3 with system) the pick-up pen. Use easy finger control for picking up or releasing.
Not for wet or corrosive materials.
Note: The Pen-Vac™ probes are interchangeable with the E232 vacuum pick-up probes. The E232 vacuum pick-up system has a vacuum spec of 8" Hg. This equates to a suction force of 2.75g/mm². To avoid cup deformation and leakage, use the following table to determine the practical lifting capacity for the cups and tips.
Cup or tip size | Size in mm | Lifting capacity in g |
Vacuum cup 0.4" | 10.16 | 70 |
Vacuum cup 0.25" | 6.35 | 35 |
Vacuum cup 0.14" | 3.56 | 10 |
Tip, 12 gauge | 2.77 | 5 |
Tip, 16 gauge | 1.65 | 1 |
Tip, 18 gauge | 1.27 | 0.5 |
Tip, 20 gauge | 0.9 | 0.3 |
Tip, 25 gauge | 0.52 | 0.05 |
Replacement pen, probes, cups, pump, filter and tubing are available.
Documents
This pen light uses new solid-state LED technology to offer a portable source of UV light built into a slim attractive pen. This new technology has a number of significant advantages over older products using UV fluorescent tubes and light bulbs.
Features
- A more compact, rugged and easily portable product, perfect for fieldwork.
- The 400nm output is just on the edge of the visible light spectrum, low enough to cause fluorescence yet inherently safer than lower UV wavelengths.
- Much longer battery life eliminates the need for power cords and battery packs. Powered by only four button cell batteries (included).
- Immediate output, no warm-up time.
- Much lower cost.
Specifications
Light source: high intensity InGaN LED
Wavelength: peak:400, Min:390, Max:410
Output power: 12,000 mW/M2
Optical rise time: 30 t, ns. Typical
Operating temperature: -4~176°F
Dimensions: 135 x 10mm
Weight: 30g with batteries
See also page P3 for more UV equipment and supplies.
Documents
RS232 1.2m cable. For Sper instruments that have a unique plug (a standard RS232 cable is not sufficient).
For Sper Scientific meters
Enables all Sper Scientific meters with RS232 ports to be plugged into any computer's USB port. Compatible with Windows 95, 98, 98ME, 2000, XP. Comes with instructions and a CD containing drivers.
For meters: E800002, E800005, E800006, E800008, E800010, E800014, E800022, E800023, E800024, E800043, E800050, E800052, E800054, E800056, E840001, E840002, E840003, E840012, E840013, E840020, E840022, E840028, E840032.
Compatible with many of our meters including but not limited to:
E800037 WBGT SD Card Logger
E800021 RH/Temp SD Card Logger
E800043 Ultimate Thermometer
E840002 Datalogging Hotwire CFM Anemometer
E840012 Detachable Probe Sound Meter
E840022 Advanced Light Meter
E840057 RS232 Cable (840020 & 840022 Only)
E840060 Force Gauge w/ RS202 Out
E840062 Torque Meter
E840063 Vibration Meter
E840064 Vacuum Meter
E850023 Anemometer SD Card Logger
E850024 Hot Wire Anemometer SD Card Logger
E850007 Visible Light SD Card Logger
E850060 pH SD Card Logger
E850069 Environmental Quality w/ Sound
The RS232 software is used with the following products for logging data and further analysis:
- K.J.T or K.J.T.R.S.E.type thermometer
- pH /mV meter
- Hygro-thermometer & psychrometer
- Digital sound level meter
- Anemometer
- Manometer
- Conductivity meter
- IR Psychrometer
- D.O. Meter
Suitable for other meters with a RS232 interface feature. This software is user-friendly.
- Up to 10,000 sample readings with real-time clock memory.
- Programmable sample interval from 1 second to 3,600 seconds.
- User-defined maximum (High) and minimum alarm (Low) setting.
- Allow further analysis by downloading data to computer program.
- To assist data analysis and process control, all data is saved in text format (.txt) and can be easily transformed for use by Microsoft Office software application.
Supplied with a CD ROM, RS232 cable with D-sub connector, and an operation manual.
Pocket size tripod is stable when open yet folds to only 127 x 38 x 13mm for easy carrying and storage. Weighs under 57g. Usage height: 89mm. Both tripods fit any metre with a threaded tripod attachment.
Lightweight at only 1kg, yet strong and stable. Fliplever legs quickly lock into place at any height up to 1.47m and quickly fold down to 0.53m for carrying and storage. The height can be further adjusted with a geared, cranked elevator column. Features a 3-way adjustable head, self-levelling swivel feet, a bubble-level, carrying handle and an accessory hook. Comes in a zippered carrying case with a handle.
Fits all Sper Scientific Meters and helps protect them from the elements during field work. The pouch enables the user to read and operate the instrument inside while the probe extends outside. Has a carrying strap and a velcro sealed top.
Dimensions: 229 x 178mm
Warranty: 90 days