Related Links
Conventional roller mixer
These tube rollers are designed for the gentle, thorough mixing of a variety of containers, including Vacutainers, bottles, test tubes, centrifuge tubes and roller bottles. The tube roller provides a gentle but highly efficient rocking and rolling motions, ideal for blood samples, viscous substances and liquid-solid suspensions, mixing up to 4 kg total weight.
As the roller mechanism rotates through each complete revolution, the right side of each roller is gently eleveted about 24 mm and return back to the original horizontal position. This gentle up/down motion provides a "wave effect" and guarantees a homogeneous mixing. Infinitely adjustable speed control for the broadest range of mixing requirements from 0 to 70 rpm provides a gentle revolution and optimal mixing.
Maintenance free DC motor with low noise level enables a smooth startand quick stop. Can be used both in cold rooms, incubators and anaerobic and aerobic chambers due to the small foot print and extremely compact design. Used in a variety applications, prevention of blood coagulation and immune precipitation etc.
Features
- Gentle rocking and rolling motions for complete mixing
- Speed range of 0-70rpm
- Max load 4kg
- Six roller design with small footprint and easy clean
- DC brushless motor provides reliable and quiet running, maintenance free
- Designed for continuous operation
- Can be used in cold rooms or in incubators
- Dimenions 450 x 260 x 120mm
Specifactions
Amplitude | 24mm |
Roller length | 280mm |
Maximum diameter tubes | 76mm |
Maximum load capacity | 4kg |
Speed range | 0 - 70rpm |
Motor type | DC brushless |
Operation type | Continuous |
Operating temperature | 4°C - 40°C |
Dimensions (LxWxH) | 190 x 280 x 230mm |
Electrical | 110-230V AC 50/60Hz |
Rocker roller mixer
These tube rollers are designed for the gentle, thorough mixing of a variety of containers, including Vacutainers, bottles, test tubes, centrifuge tubes and roller bottles. Adjustable speed for the broadest range of mixing requirements. The tube roller provides a gentle but highly efficient rocking and rolling motions, ideal for mixing blood samples, viscous substances and liquid-solid suspensions. Used in a variety applications, prevention of blood coagulation and immune precipitation etc. It can roll 15 x 50mL centrifuge tubes or 10 x 15mL centrifuge tubes.
Features
- Gental rocking and rolling motions for complete mixing
- Digital speed control and LCD display, speed and timer can be viewed simultaneously
- Speed range of 10-70rpm
- Six roller design with small footprint and easy clean
- Drip tray contains accidental spillages
- Designed for continuous or timed operation
- DC brushless motor is quiet and maintenance free
- Cold room and incubator compatible
Specifactions
Amplitude | 24mm |
Roller length | 340mm |
Maximum diameter tubes | 76mm |
Maximum load capacity | 5kg |
Speed range | 10 - 70rpm |
Motor type | DC brushless |
Operation type | Continuous or timed |
Operating temperature | 4°C - 40°C |
Dimensions (LxWxH) | 190 x 280 x 230mm |
Weight | 5.5kg |
Electrical | 110-230V AC 50/60Hz |
Rocker roller mixer
Benchmark TubeRollers are designed for the gentle, thorough mixing of a variety of containers, including Vacutainers, bottles, test tubes, centrifuge tubes and roller bottles. Both models (5 and 10 roller) operate at a constant 38rpm, chosen as the optimum speed for the broadest range of mixing requirements.
As the roller mechanism rotates through each complete revolution, the right side of each roller is gently elevated about 0.5in (13mm) and returns to the horizontal starting position. This additional, gentle up and down motion provides a "wave" effect and guarantees that the entire sample is subjected to complete, thorough mixing, end to end. This built in tilt feature provides a level of homogeneous mixing uniformity that can not be match by any stationary roller apparatus.
From blood collection tubes to roller bottles, Benchmark TubeRollers are the ideal choice for research, clinical laboratories and doctor's offices.
Features
- Constant 38rpm
- Gentle rolling motion
- Smooth ± 5 degree tilt action
- For tubes/bottles from 8mm to 200mm diameter
Typical Sample Load Capacity
Cat. No. | EBR3005 | EBR3010 |
12 x 75mm tubes | 12 | 26 |
16 x 100mm tubes | 8 | 18 |
15mL screw cap tubes | 8 | 18 |
50mL screw cap tubes | 8 | 18 |
850cm² roller bottles | 1 | 2 |
Speed | Fixed, 38 rpm (± 10%) |
---|---|
Tilt angle | ± 5° |
Motion | Simultaneous roll & tilt |
Operating temperature range | +4 to +40°C |
Dimensions (w x d x h) | EBR3005: 450 x 180 x 90mm EBR3010: 450 x 360 x 90mm |
Number of rollers | EBR3005: 5 EBR3010: 10 |
Weight | EBR3005: 5kg EBR3010: 8kg |
Roller dimensions | 30 x 320mm |
Vessels accepted | 8mm to 200mm (diameter) |
Roller spacing | 5mm (rollers are on 35mm centers) |
Electrical | 230V, 50-60Hz |
Warranty | 2 Years |
Rotating Mixer
This analoge tube rotator gives gentle but effective mixing of biological samples to be held in 1.5mL to 50mL micro tubes, used in a variety of applications including immune precipitations, prevention of blood coagulation, latex diagnostics etc.
Features
- Circular rotating action, gives gentle but effective mixing
- Adjustable speed range of 0 to 80rpm
- Used with a wide variety of accessories
- Continuous quiet operation
- Compact bench saving design
- Can be used in cold rooms or incubators
Specifications
Speed fixed | 0 - 80rpm |
Tilt Angle | 90° Fixed |
Disk tube capacity | 1.5mL x 48 / 15mL x 16 / 50mL x 8 |
Overall dimensions | 5 - 40°C |
Weight | 2.7kg |
Electrical supply | 230V AC 50Hz |
Optional Accessories
Disc accessory, for 1.5mL x 12 centrifuge tubes
Disc accessory, for 15mL x 12 centrifuge tubes
Disc accessory, for 50mL x 12 centrifuge tubes
Horizontal tube rotator
The rotator provides a gentle but effective mixing of biological samples in 1.5mL to 50mL micro tubes, used in a variety of applications including immune precipitations, prevention of blood coagulation, latex diagnostics etc. Economical solution for continuous horizontal mixing of biological samples.
Compact and space saving design offers multiple advantages. Adjustable speed control from 0 to 80 rpm provides a regulated gentle revolution and precise stirring speed. Reliable and extremely quiet motor guarantees an even distributed efficient mixing for all speed ranges.
Features
- Compact and space saving design
- Rotisserie rotating action, gives gentle but effective mixing
- Adjustable speed range of 0 to 80rpm
- Comes with rotisserie and 12ea 1.5/15/50mL centrifuge tube clamps
- Used with a wide variety of accessories
- Can be used in cold rooms or incubators
- Continuous quiet operation
Specifications
Speed range | 0 - 80rpm |
Disk tube capacity | 1.5mL x 48 / 15mL x 16 / 50mL x 8 |
Operating temperature range | 5 - 40°C |
Overall dimensions (LxWxH) | 533 x 152 x 203mm |
Weight | 3kg |
Electrical | 230V AC 50Hz |
Optional Accessories
Rotisserie accessory, for 1.5mL x 12 centrifuge tubes
Rotisserie accessory, for 15mL x 12 centrifuge tubes
Rotisserie accessory, for 50mL x 12 centrifuge tubes
Angled Rotating Mixer
The rotator give gentle but effective mixing of biological samples to be held in 1.5mL to 50mL micro tubes, used in a variety of applications including immune precipitations, prevention of blood coagulation, latex diagnostics etc.
Features
- Comes with disc (ERD2) or rotisserie accessory (ERR2)
- Digital control speed and allowing procedures to be accurate
- LCD displays speed and timer
- End-over-end or rolling action, gives gentle but effective mixing
- Adjustable speed range of 10 to 70rpm
- Adjustable mixing angle between 0 and 90°
- A wide variety of rotisserie and disc accessories are available
- Continuous and timed quiet operation
- Can be used in cold rooms or incubators
Specifications
Speed range | 10 - 70rpm |
Tilt angle | 0 - 90° |
Operating temperature range | 5 - 40°C |
Timer range | 1 - 1199mins |
Overall dimensions (LxWxH) | 254 x 203 x 254mm |
Weight | 4.5kg |
Electrical | 230V AC 50Hz |
Optional Accessories
Disc accessory, for 1.5mL x 60 centrifuge tubes holder
Disc accessory, 15mL x 16 centrifuge tubes holder
Disc accessory, 50mL x 8 centrifuge tubes holder
Disc support rods, 4 pcs, use with disk accessories
Rotisserie accessory, for 1.5mL x 48 centrifuge tubes held horizontally
Rotisserie accessory, for 15mL x 24 centrifuge tubes held horizontally
Rotisserie accessory, for 50mL x 24 centrifuge tubes held horizontally
Rotisserie accessory, for 1.5mL x 32 centrifuge tubes held vertically
Rotisserie accessory, for 15mL x 16 centrifuge tubes held vertically
Rotisserie accessory, for 50mL x 16 centrifuge tubes held vertically
ORBITAL THERMO-SHAKER INCUBATORS
For mixing plus heating or heating and cooling
Designed for heating, cooling and mixing of small samples. Mixing and heating or cooling modes can be used simultaneously or independently, i.e. the device can work as a shaker and as a dry bath. Blocks with many tube configurations are available separately.
Features
- LCD display
- Accurate control and display of time, temperature and speed
- Overheating protection
- Low noise levels, even at maximum speed
- Conforms to CE safety standard
- Peltier design of EA302 provides thermal control in a compact unit
- Large variety of blocks
- Long-life brushless motor
Specifications
Cat.No. | EA300 | EA302 |
---|---|---|
Temperature control range | RT + 5°C ~ 100°C | 0°C ~ 100°C at ambient ?20°C 4°C ~ 100°C at ambient ?25°C 10°C ~ 100°C at ambient ?30°C |
Temperature setting range | 5°C ~ 100°C | 0°C ~ 100°C |
Timer range | 1min ~ 99h 59min | 1min ~ 99h 59min |
Temperature accuracy | ±0.5°C | ±0.5°C |
Display accuracy | ±0.1°C | ±0.1°C |
Mixing speed | 200 ~ 1500rpm | 200 ~ 1500rpm |
Heating time (25°C to 100°C) | ?15min | ?15min |
Cooling time | N/A | ?30min (from RT to RT to 20°C) ?15min (from 100°C to 20°C) |
Mixing orbit (mm) | 2 | 2 |
Dimensions (mm) | 300 x 220 x 170 | 300 x 220 x 170 |
Net weight (kg) | 7.0 | 8.5 |
Blocks (ask for price)
Maximum speed 1500rpm unless otherwise noted
A Block - 96 x 0.2mL
B Block - 54 x 0.5mL
C Block - 35 x 1.5mL
D Block - 35 x 2.0mL
E Block - 15 x 0.5mL + 20 x 1.5mL
F Block - 24 x Ø 12mm tubes, max. speed 1200rpm
G Block - 12 x 15mL Falcon tubes, max. speed 750rpm
H Block - 6 x 50mL Falcon tubes, max. speed 750rpm
I Block - 103 x 67 x 30mm water bath block
J Block - 96 x 0.2mL microplate
K Block - 24 x 5mL tubes, max. speed 1200rpm
L Block - 96-well deep well plate, max. speed 800rpm
M Block - 15 x 5mL Eppendorf tubes, max. speed 1200rpm
ORBITAL TURBO THERMO-SHAKER INCUBATORS
Orbit 2mm and 3mm
Fast thermo-shaker with may blocks and tube holders.
Features
- Thermo shaker for microplates, tubes and glass vials
- Well controlled 3-dimensional mixing prevents spilling and lid wetting
- Fast shaking and mixing up to 3,000rpm
- 2 Programmable soft keys, integrated vortex and short mix functions
- Very small, light, efficient and quiet
- 10 Blocks for heating and shaking
- 5 Tube holders for shaking without heating
- Lid included
Specifications
Cat. No. | EA310 | EA312 |
---|---|---|
Mixing frequency | 300 ~ 3000rpm | 300 ~ 1700rpm |
Mixing orbit | 2mm | 3mm |
Speed setting increments | 10rpm | 10rpm |
Mixing accuracy | ±25rpm | ±25rpm |
Mixing speed | 200 ~ 1500rpm | 200 ~ 1500rpm |
Temperature display accuracy | ±0.1°C | ±0.1°C |
Heating time (25°C to 100°C) | ?12min | ?12min |
Temperature accuracy | ±0.25°C at 37°C ±0.5°C at 95°C | ±0.25°C at 37°C ±0.5°C at 95°C |
Temperature range | RT + 5°C ~ 100°C | RT + 5°C ~ 100°C |
Timer range | 1min ~ 99h 59min | 1min ~ 99h 59min |
Timer increments | 1min | 1min |
Stored programs | 2 | 2 |
Operating voltage | DC 24V 150W | DC 24V 150W |
Power adapter | AC 100V ~ 240V | AC 100 ~ 240V |
Dimensions (mm) | 230 x170 x 165 | 230 x170 x 165 |
Net weight (kg) | 5.5 | 5.5 |
Packed weight (kg) | 9.0 | 9.0 |
Blocks and tube holders
A-200 - 96 x 0.2mL tubes
B-200 - 54 x 0.5mL tubes
C-200 - 35 x 1.5mL tubes
D-200 - 35 x 2.0mL tubes
E-200 - 15 x 1.5mL + 20 x 0.5mL tubes
F-200 - 24 x Ø 12mm tubes
G-200 - 32 x 0.2mL + 25 x 1.5mL tubes
H-200 - 32 x 0.2mL +10 x 0.5mL + 15x1.5mL tubes
I-200 - 103 x 67 x 30mm bath block
J-200 - 96 x 0.2mL microplate
MIX-A - 0.2mL PCR tube holder
MIX-B - 0.5mL tube holder
MIX-C - 1.5/2.0mL tube holder
MIX-D - 8 x 15mL tube holder
MIX-E - 3 x 50mL tube holder
ORBITAL THERMO-SHAKER INCUBATORS FOR MICROPLATES
Micro-processor controlled shaking incubators for 2 and 4 microplates. Heating from above and below for excellent temperature uniformity. Both can be used as incubators alone, without the shaking function.
Suitable for
Cytochemistry - for in situ reactions
Immunochemistry - for immunofermentative reactions
Biochemistry - for enzyme and protein analysis
Molecular chemistry - for matrix analysis
Features
- LCD display
- Heating above and below the microplates
- Incubation temperature up to 70°C in 0.1°C steps
- Shakes and incubates 2 or 4 microplates simultaneously
- Sound alert and auto-stop after completion of program
- Excellent temperature accuracy and uniformity across the plates
- Microprocessor controlled time, RPM and temperature
Specifications
Cat. No. | EA314-2 | EA314-4 |
---|---|---|
Temperature range | RT + 5°C ~ 70°C | RT + 5°C ~ 70°C |
Temperature accuracy | ±0.5°C | ±0.5°C |
Timer range | 1min ~ 99h 59min | 1min ~99h 59min |
Display accuracy | ±0.1°C | ±0.1°C |
Shaking speed | 200 -1200rpm | 200 - 1500rpm |
Heating time | ?25min | ?25min |
Platform capacity | 2 microplates | 4 microplates |
Mixing orbit | 2mm | 2mm |
Dimensions | 280 x 270 x 150mm | 320 x 350 x 185mm |
Net weight | 6.5kg | 9.0kg |
The EBD1000, is designed to rapidly homogenize, emulsify, suspend and disrupt biological samples. Ideal for use with microtubes, the homogenizer works well with samples from 0.1mL to 250mL (depending upon the generator probe used). The EBD1000 is a rotor stator homogenizer, and works by drawing the sample, in liquid, into the generator probe with the variable speed rotor, and then forcing it out through the slots in the stator. This achieves mechanical shearing of the sample. As the sample is repeatedly drawn up and forced through the stator, additional shearing takes place. Most samples are completely homogenized in 30 seconds are less. A powerful, 130W motor drives the rotor at speeds from 8,500 to 30,000 rpm. Speed is adjustable in six steps to meet sample processing needs. A separate on/off switch allows the homogenizer to be left at the appropriate setting.
Generator probes are available in four sizes. The 5mm and 7mm diameter have a 50mm length for use with samples in microbtubes. The 10mm x 115mm is ideal
for use with 15 and 50mL tubes and 14mm x 130 mm, for 50mL tubes and vessels up to 250ml. The unit is supplied with one each of the 5mm and 7mm generator probes. All the generator probes are made of stainless steel and can be sterilised by autoclaving.
Speed Range: | 8500 to 30,000rpm |
---|---|
Capacity: | 0.1 to 250mL |
Noixse Level: | <70 db |
Operating Temp. Range: | +4° to 65°C |
Dimensions: | 4.5 x 5.8 x 22.5 cm (1.89 x2.3 x 9 in.) |
Weight: | 1.35 lbs /0.62kg |
Electrical: | 230V, 50HZ (115V, 60Hz on request) |
Warranty: | Two Years |
BEAD MICROTUBE HOMOGENIZERS
Extremely powerful mixing action for lysis, grinding or homogenization.
Faster and more effective than tissue grinders.
For all sample types, from soft tissue to bone.
Sealed, 2.0mL tubes for zero cross contamination.
2 year manufacturers warranty.
These units are high energy, bench top homogenizers that set the performance standard for personal sized cell distribution and lysis instruments. Simultaneous homogenization of multiple samples takes place (often under 45 seconds) inside the disposable 2mL screw cap microtubes. The optimised mixing motion causes rapid cell distribution through constant high velocity impact from the hardened micro-beads chosen specifically for your sample type.
We offer an assortment of prefilled tube kits for a variety of sample types. The popular Triple-Pure kits include acid washed, heat treated, zirconium beads. The beads are tested to be free of nucleases, making them ideal for molecular biology applications. A convenient starter kit is available to accommodate a broad range of sample types and optimise applications.
Specifications | EBD1030 | EBD2400 | Capacity | 3 x 2.0mL | 24 x 2.0mL tubes | Speed | 2800 to 4000 rpm | 4.00 to 7.00 m/s, 0.05 increments | Batch time | Often under 45 seconds | Often under 35 seconds | Cycle time | 3 - 300 seconds | 1 - 90 seconds, 1 second increments | Pause between cycles | 0 - 2 minutes, 1 second increments | Max cycles per program | 10 | Program memory | Up to 50 | Acceleration/deceleration time | <2seconds | Noise level | <68db | Dimensions (WxDxH) | 170 x 210 x 135mm | 280 x 360 x 385mm | Weight | 2.2kg | 25kg | Electrical | 240V, 50-60Hz | 240V, 50-60Hz, 600W |
- Denaturation of DNA, RNA and proteins
- Lipid extractions
- Yeast and bacteria cultivation
- Restriction digests
- Reverse transcription
- DNA/plasmid isolation
- Gentle thawing of biological materials
Specifications | |
Temp. range (HC) | Ambient -20° to 100°C |
Temp. range (H) | Ambient 5° to 100°C |
Heating ramp rate | 5.0°C / min. |
Cooling ramp rate | 2.5°C / min. (HC only) |
Temp. accuracy | /-1.0°C |
Speed range | 200 to 1500 rpm, or "off" |
Motion / Orbit | Horizontally circular / 2mm |
Capacity | Per selected block |
Dimensions | 210 x 290 x 210mm |
Weight | 8kg |
Electrical | 120V or 230V, 50-60Hz |
Eight different blocks accommodate all popular tubes and plates, including as many as six 50mL tubes. Speed, time and temperature settings are continuously visible on the LCD, simultaneously showing both actual and selected values. Integral over-temperature control ensures long life, safety and sample integrity.
Note: EB5000 is discontinued but we can still get the accessories if required.
Replaced by EA300.
LOW SPEED ORBITAL SHAKER
The Orbi-Blotter™ is a low speed orbital shaker designed for gel blotting, staining/destaining and washing applications. It features a gentle orbital motion with speed control down to as little as 3rpm, making it the ideal orbital choice for low speed applications, such as blotting, washing, staining/destaining, etc. A large 350 x 300mm platform is included along with a non-slip rubber mat for holding trays, dishes, plates and other flat vessels.
Optional accessories
EB2000-SPF Stacking platform with flat mat, 356 x 300mm
EB-SPE Stacking platform leg extensions, 32mm
Specifications | |
Speed range | 3 to 70 rpm |
Orbit | 19mm |
Platform dimensions | 350 x 300mm |
Exterior dimensions | 355 x 305 x 152mm |
Weight | 5.5kg |
Operating temperature | 4 to 65°C |
Electrical | 120V or 230V, 50-60Hz |
Powerful variable speed shakers with efficient orbital motion. Speed and time are microprocessor controlled. A variety of platforms enhances the suitability for various applications in microbiology, chemistry, immunology, biochemistry and molecular biology laboratories. The shakers can be used in a cold room or incubator.
Specifications
Catalogue number | EA354-10 | EA354-20 |
---|---|---|
Shaking speed | 50 - 300rpm | 50 - 250rpm |
Orbit | 10mm | 20mm |
Timer | 1min ~ 99h 59min | 1min ~ 99h 59min |
Load capacity | 3kg | 2.5kg |
Motor | DC brushless | DC brushless |
Operating temperature | ambient + 5°C to 40°C | ambient + 5°C to 40°C |
Dimensions | 280 x 270 x 110mm | 280 x 270 x 110mm |
Net weight | 7.0kg | 7.0kg |
Platform options (not included, ask for price)
P P - 1 = Flat platform with non-slip rubber mat
P P 1 2 -1 0 0 = Platform with clamps for flasks, 100-150mL
P P 0 6 -2 5 0 = Platform with clamps for flasks, 250-300mL
U P - 1 = Universal platform with adjustable bars for different types of flasks, bottle
MP01 = Platform with springs (the springs can be pulled apart to enclose many different shapes)
Orbital shaker with multi-function shaking system. Nine programmable shaking patterns, clockwise, anticlockwise, continuous or with pauses.
Features
- Programmable PID
- Diagnostic function identifies errors
- Multiple shaking patterns
- Brushless DC motor for smooth shaking
- Range of platforms and clamps
Specifications
Shaking speed | 50 - 250rpm |
Orbit | 15mm |
Timer | 1min ~ 99h 59min |
Display accuracy | 0.1°C |
Load capacity | 8kg |
Programs | 9 patterns |
Base platform dimensions | 270 x 240mm |
Motor | DC brushless |
Shaker dimensions | 320 x 350 x 145mm |
Net weight | 18kg |
Platforms and clamps (not included, ask for price)
SH100 = Flask clamps for 50 - 100mL flasks
SH250 = Flask clamps for 200 - 250mL flasks
SH500 = Flask clamps for 500mL flasks
SH1000 = Flask clamps for 1000mL flasks
S-PP-1 = Platform W320 x D 290mm (flat, with rubber mat)
S-PP-2 = Platform W300 x D270mm (perforated for clamps)
S-UP-1 = Platform W340 x D280 x H175mm (with 4 adjustable rolling bars)
S-UP-2 = Platform W340 x D280 x H175mm (with 3 adjustable rolling bars)
To avoid contaminations, unintentional release of gas or deviations from protocol, both speed and time are set via the included remote control module. The remote controller allows the user to set and adjust the shaker settings without opening the chamber door(s).
The instrument is supplied with a 330 x 305mm non-slip platform. In addition, convenient MAGic Clamp™ platforms (large or small) are also available for use with Erlenmeyer flasks and test tube racks. The unique magnetic attachment method has been widely recognised as the easiest way to instantly change between flask clamps of different sizes.
Features
- Designed for repeated use in CO2 incubators and other extreme environments
- Remote control, adjust settings without exposing chamber
- Exchange flask clamps in one second with MAGic Clamp™ platform
- Available with unique MAGic Clamp™ accessories
- Ideal for cell/tissue culture
Specifications | Speed range | 30 to 300 rpm | Speed increment | 1 rpm | Orbit | 19mm | Maximum capacity | 2 x 2L or 5 x 1L Flasks | Platform dimensions | Included | 330 x 300mm | MAGic Clamp™ platform (small) | 240 x 295mm | MAGic Clamp™ platform (large) | 350 x 300mm | Exterior dimensions | Shaker | 300 x 340 x 90mm | Remote control | 180 x 170 x 90mm | Cord length | 1540mm | Weight | 11.5kg | Operating temperature | 0 to 60°C | Electrical | 230V, 50-60Hz |
MAGic Clamps™ available separately - see item below.
Optional Platforms - see above
EBT300-PMC MAGic Clamp™ universal platform, 292 x 241mm
EBT3000-PMC MAGic Clamp™ universal platform, 356 x 305mm
EBT3000-PZMP Dedicated platform, 4 x microplates (standard or deep well)
EBT3000-PZSR Spring rack platform, for uncommon vessels and containers
MAGNETIC CLAMPS FOR MAGic Clamp™ UNIVERSAL PLATFORMS
Maximum number of clamps to fit on EBT300-PMC and EBT3000-PMC:
EBT300 | EBT3000 | |
EBTMC-0050 | 20 | 30 |
EBTMC-0125 | 12 | 24 |
EBTMC-0250 | 8 | 14 |
EBTMC-0500 | 5 | 9 |
EBTMC-1000 | 4 | 5 |
EBTMC-2000 | N/A | 2 |
EBTMC-TR | 1 | 2 |
EBTMC-TR tube rack fits 21 x 15mL and 12 x 50m
High performance microplate shaker which accommodates up to 4 microplates (culture plates). Shaking speed and time are programmable via the keypad. Speed and time can be viewed simultaneously on the large LED display.
Features
- Variable speed from 200rpm to 1,500rpm
- DC brushless motor for gentle and powerful vibration
- Orbit of 3mm for efficient mixing in small sample vessels
- Continuous or timed operation
- Simple spring holders for easy and quick plate installation
Specifications
Mixing orbit | 3mm |
Speed setting increments | 10rpm |
Speed | 200 - 1500rpm standard 200 - 1000rpm deep well |
Timer | 1min ~ 99h 59min |
Dimensions | 290 x 270 x 120mm |
Net weight | 6.5kg |
Compact and universal Microplate Mixer can hold one or two microplates, used in life science field including microbiology, cell and molecular biology, immunology and biotechnology.
Features
- Compact and universal microplate mixer suitable for small tubes and a standard 96-well microplate
- Wide range of accessories, easy installation and replacement
- Continuous operation
- Stepless speed regulation of motor
- DC brushless motor with low running noise and long service
Specifications
Cat. No. | EMM1 |
Shaking movement | Orbital |
Orbital diameter | 4.5mm |
Maximum shaking capacity (with attachments) | 0.5kg |
Motor type | External rotor brushless motor |
Motor input | 18W |
Motor output | 10W |
Speed range | 0 - 1500rpm |
Speed display | Scale |
Electrical | 230VAC ±10% 50Hz 20W |
Dimensions (WxDxH) | 260 x 150 x 80mm |
Weight | 3kg |
Optional accessories
Universal top plate (round), used with the tube adapters
Tube adapter, for 48 holes test tubes, Ø6mm (0.5mL), used with the universal top plate
Tube adapter, for 18 holes test tubes, Ø10mm (1.5-2.0mL), used with the universal top plate
Tube adapter, for 12 holes test tubes, Ø12mm (2-7mL) , used with the universal top plate
Tube adapter, for 8 holes test tubes, Ø16mm (4-15mL), used with the universal top plate
Tube adapter, for 8 holes test tubes, Ø20mm (20mL), used with the universal top plate
Microplate clamp
Double microplate clamps
This orbital shaker is designed to provide a smooth shaker operation when under maximum load and speed. The top tray of each model has multiple threaded holes to accommodate flask holders from 50mL to 1000ml. A turn dial allows for easy RPM adjustments with the current shaking RPM shown on an analogue dial. This shaker is widely used in biological, medical and chemical laboratories. The shaker has turn dial adjustment control to provide a smooth circular shaking motion.
Features
- Shaker is widely used in biological, medical, and chemical laboratories.
- Features turn-dial adjustment control to provide a smooth circular shaking motion.
- Shaking speed: Startup 0 - 300 rpm
- Orbit oscillation amplitude: 20mm
- Time range: 0 - 120 min (or continuous operation)
- It uses multi-use springs to clamp down flasks
- Total body capacity: Erlenmeyer flask: 250mL x 13; 500mL x 11; 1000mL x 5
Shaking speed | Startup 0 - 300 rpm |
Shaking Orbit | 20mm |
Time range | 0 - 120min (or continuous operation) |
Total bottle capacity | Erlenmeyer flask 250mL x 13, 500mL x 11, 1000mL x 5 |
Overall size | 419 x 343 x 241mm |
Weight | 15kg |
Electrical | 230VAC 50Hz 60W |
EA352 is a heavy duty vortex mixer designed to facilitate hands-free mixing in tubes. It can handle up to 50 samples. Speed is adjustable from 500 to 2500 rpm with electronic speed control. Built-in timer is adjustable from one minute to 99h59min operation. Various tube sizes can be mixed by simply changing the foam tube racks.
Features
Pulsing mode: Programmable pulsing mode allows users to adjust the pulse-on and pulse-off times between 1~59 seconds in 1 second intervals. This feature enhances the vortex action by creating a more vigorous mix.
Microprocessor control: The variable speed microprocessor control provides consistent uniform mixing action.
LCD Display: Independent LCD displays for speed and time allow operator to view both settings.
Applications: Suspensions, high throughput testing in clinical, environmental and chemistry laboratories.
Specifications
Mixing orbit | 3.6mm |
Speed range | 500 ~ 2500rpm |
Timer | 1min ~ 99h 59min |
Speed accuracy | ±25rpm |
Maximum weight capacity | 4.5kg |
Tray dimensions (L x W) | 310 x 180mm |
Overall dimensions ( Lx W x H) | 426 x 250 x 480mm |
Net weight | 16kg |
Packed weight | 20kg |
Foam test tube trays
MTV-B01 - 50 x Ø10mm tubes
MTV-B02 - 50 x Ø12mm tubes
MTV-B03 - 50 x Ø13mm tubes
MTV-B04 - 50 x Ø16mm/15mL tubes
MTV-B05 - 50 x Ø25mm tubes
MTV-B06 - 50 x Ø29mm/50mL tubes
MTV-B00 - tray pad set (upper and lower)
Features
- Touch operation
- Fixed speed at 3000rpm
- Small compact shape, ultra shock mount
- Eccentric bearing design
The Vortex mixer widely used in life science, physical and chemical analysis fields, for vigorous re-suspension of cells or chemical pellets in tubes up to 15ml.
Features
- On off switch with speed dial
- Touch and continuous operations
- Specially designed vacuum suction feet hold the instrument onto the work surface
- Aluminum cast housing with suction feet to prevent the unit from moving across the benchtop
- Wide speed range of 0-2500rpm, stepless speed regulation
- Used for various mixing applications with optional adapters, handles up to 48 tubes
Specifications
Cat. No. | EVM1 |
Shaking movement | Orbital |
Orbital Diameter | 4mm |
Motor input | 58W |
Motor output | 10W |
Speed range | 0 - 2500rpm |
Speed display | Scale |
Operation type | Continuous / touch operation |
Electrical | 230VAC ±10% 50Hz 60W |
Dimensions (WxDxH) | 127 x 130 x 160mm |
Weight | 3.5kg |
Optional Accessories
Standard top cup, for <Ø30mm tubes and small vessels
Universal top plate, 100mm plate attachment
Platform pad, for <Ø99mm tubes and small vessels
Tube holding rod, used with the tube adapters
Tube adapter, for 48 holes test tubes, Ø6mm, used with tube holder rod or universal top plate
Tube adapter, for 15 holes test tubes, Ø10mm, used with tube holder rod or universal top plate
Tube adapter, for 12 holes test tubes, Ø12mm , used with tube holder rod or universal top plate
Tube adapter, for 8 holes test tubes, Ø16mm, used with tube holder rod or universal top plate
Tube adapter, for 8 holes test tubes, Ø20mm, used with tube holder rod or universal top plate
4G Platypus Jar Testers feature unique design elements:
Lightweight, durable body
Easy to clean, ABS corrosion resistant materials, Weight: 12kg.
Microprocessors
Four independent stations with independent/sequential speed/time
settings for three (3) mix/flocculation stages.
Last RPM and TIME memory.
Actual paddle speed controlled by P+I controllers tied‐back to
Hall Effect speed sensors.
Tactile, membrane style Decals
Keypads at each Jar station ‐ to set mix/flocculation speed,
duration and control mode for each stage.
Status, mode selection and error LED indicators.
Warranty: 2 years
Reduced operational noise
Rubber power transmission belts at paddle shaft gearboxes.
Digital Displays
Each station includes a 14mm 3 digit numeric LED display for RPM set/actual speed readout and
a 14mm 4‐digit clock LED display for stage time set/time elapsed.
Lighting
Ice white backlighting to observe floc development, settling rates and supernatant clarity.
Square Jars
1L2 or 2L2 capacity options.
Square jar geometry for emulation of plant conditions.
Durable, clear polycarbonate material ‐ easy to clean wall and floor corner fillets.
Anti‐slip top lips for safe handling in wet environments.
Unique Paddles
Clip‐on/off, easy‐to‐clean radial and axial flow types offer a wide range
of mix/flocculation velocity gradients.
Jar Tester EMC and test certification
FCC Title 47, Part 15 Class B
AS/NZS CISPR 11 (C‐tick)
EN 61326:2002 (emissions + immunity)
EN 61000 series (as applicable)
CE, UL (as applicable)
Unit dimensions (mm): 710 x 380 x 200
Description Unit
Platypus 4G Jar Tester without Jars 1 each
Platypus 4G Jar Tester with 4 x 1L2 Jars 1 each
Platypus 4G Jar Tester with 4 x 1L2 Jars, with sample taps 1 each
Platypus 4G Jar Tester with 4 x 2L2 Jars 1 each
Platypus 4G Jar Tester with 4 x 2L2 Jars, with sample taps 1 each
NOTE: Each 4G Jar Tester includes ‐ 4 sets of the 4 clip on 'easy clean' polycarbonate paddle variants ‐ Protective dust cover ‐ Reliable power supply (US, UK, AU/NZ, Europe) ‐ Operation and maintenance manual (hard copy + on‐line) ‐ Velocity gradient tables (various paddle types + water temperatures) ‐ On‐line coagulant and polymer 'stock solution calculator'.
Accessories and Replacement Components
Heavy Duty Carrying Case (black) with wheels, 4‐Paddle Jar Tester 1 each
1L2 Floc Jar (polycarbonate ‐ injection moulded) 1 each
1L2 Floc Jar (polycarbonate ‐ injection moulded) ‐ with sample taps 1 each
2L2 Floc Jar (polycarbonate ‐ injection moulded) 1 each
2L2 Floc Jar (polycarbonate ‐ injection moulded) ‐ with sample taps 1 each
Paddles (easy clean polycarbonate) ‐ per set of 4 x 4: different paddle types 1 each
Dust Cover replacement 1 each
** The Platypus 4G Jar Tester is conjunctively compatible with all Platypus Dissolved Air Flotation (DAF)
Test Accessories ‐ sold separately (Assembly Part No. 4GSAT).
Assess best practice design and management of DAF ‐ with Platypus 4G DAF Test Accessories
DAF clarification process uses micro bubbles to attach and float flocculated and suspended particles, including slow settling colloids, algae, hydroxides, and turbidity generally ‐ to a treatment plant's water surface for ultimate removal.
DAF Test Accessories are used in conjunction with standard Jar Testing ‐ to assess and determine appropriate DAF process parameters including air saturation pressure, recycle rates, DAF treatability, float cohesion, appropriate polymers and appropriate flotation surface loading rates.
The above illustration depicts 4 x DAF Jars in place at a 4G Platypus Jar Tester, a distribution manifold with quarter turn isolating valves, a Saturator assembly and connection tubing.
Weight: 9 kg (20 lbs)
Prod. No.
333333 Platypus 4G DAF Test Accessories (4GSAT)
Inclusive:
A static Saturator (pressure vessel) for the dissolution of air in the vessel's (water) contents;
Quick‐connectors for compressed air and Saturator outlet;
Air pressure regulator;
Fill funnel;
Fine bubble air diffuser;
Air bleed needle valve to diffuse air through the vessel's contents under pressure;
Manifold assembly to distribute air saturated water from the Saturator to DAF Jar(s) dispersers;
4 x "DAF" Jars each with air saturated water dispersers, subnatant sample taps and connection tubing.
Prod. No. Optional Accessories:
3333334 Heavy Duty Carry Case (4GSATCC) ;
3333335 Whisper quiet 32 dB(A) air compressor (4GCOMP).