In many science disciplines sample isolation and purification require procedures to concentrate true solutions or particular matter within a solution. Techniques employed include distillation, heating an evaporation dish, freeze drying, filtration or centrifugation of suspended particular matter.
The following group of instruments uses evaporation at RT or moderate heat. The process is accelerated by a stream of dry gas over the surface. The most commonly used gas is industrial dry nitrogen.
These instruments comprise of a base and stand assembly, sample holder and gas distribution system. Test tubes are held in a block. The gas at 5-10 psig passes through a distribution manifold and then through pipettes which blow onto the samples surfaces. Depending on the test-tube size and solvent volume pipettes can be individually raised or lowered to a suitable sample distance
Cat. No. | FMD200-1 | FMD200-1A | FMD200-2 |
Temperature control range | ambient+5°C - 150°C | ||
Timer | 1min - 99h59min | ||
Display | LED | ||
Temperature control accuracy @40 - 100°C | ±0.5°C | ||
Temperature control accuracy @100 - 150°C | ±1°C | ||
Display Accuracy | 0.1°C | ||
Heating time (40 - 150°C) | ≤30min | ||
Standard blocks | 1 | 1 | 2 |
Nitrogen consumption (L/min) | 0-10 | ||
Dimensions (mm) | 280 x 240 x 110 | ||
Needle length (mm) | 150 | 80 | 150 |
230VAC 50/60Hz 200W | 230VAC 50/60Hz 400W |
Sample holding heating blocks
Cat. No. | Diameter | Capacity | Dimension (mm) |
FMD200-B01 | 6 mm | 49 | 96 x 96 x 49 |
FMD200-B02 | 7 mm | 49 | 96 x 96 x 49 |
FMD200-B03 | 10 mm | 25 | 96 x 96 x 49 |
FMD200-B04 | 12 mm | 25 | 96 x 96 x 49 |
FMD200-B05 | 13 mm | 25 | 96 x 96 x 49 |
FMD200-B06 | 15 mm | 12 | 96 x 96 x 49 |
FMD200-B07 | 15 mm | 16 | 96 x 96 x 49 |
FMD200-B08 | 16 mm | 12 | 96 x 96 x 49 |
FMD200-B09 | 16 mm | 16 | 96 x 96 x 49 |
FMD200-B10 | 19 mm | 12 | 96 x 96 x 49 |
FMD200-B11 | 19 mm | 16 | 96 x 96 x 49 |
FMD200-B12 | 20 mm | 9 | 96 x 96 x 49 |
FMD200-B13 | 26 mm | 9 | 96 x 96 x 49 |
FMD200-B14 | 28 mm | 4 | 96 x 96 x 49 |
FMD200-B15 | 40 mm | 4 | 96 x 96 x 49 |
FMD200-B16 | 0.5 ml centrifuge tube | 49 | 96 x 96 x 49 |
FMD200-B17 | 1.5 ml centrifuge tube | 25 | 96 x 96 x 49 |
FMD200-B18 | 2.0 ml centrifuge tube | 25 | 96 x 96 x 49 |
FMD200-B19 | 0.2ml tubes | 96 | 78 x 114 x 26 |
FMD200-B20 | 0.2ml microplate | 96 | 81 x 123 x 19 |
Please note, MD200-1A can only hold B19 or B20